Remaking My First Sewing Project Four Years Later

Last September, I felt this aching in my creative heart to make what I didn’t make well the first go around. A project that some would say was insane to attempt as a beginner because of the difficult nature of velvet and the frustration that is sewing with stretch fabric. The dress pictured below was my first wearable garment. I saw the same purple stretch fabric on sale for Halloween at my local Joann’s and my heart skipped a beat. It still exists – I could try again!

You see the first dress I made was constructed so poorly that I ended up cutting it down into a skirt because I was embarrassed to continue wearing it out. After all, the bodice was bunching up and gathered strangely in the back. I lacked the confidence to keep going and try to alter the dress for success. I see now that it would have been an easy make to take out the gathers and bunches of fabric for clean seams, but that kind of thought came with trial and error. I needed a bit more experience and patience to make it right, and at the time in 2020, my younger self was not willing to wait.

But what if I am living in the past? My mind thought, maybe I should let it be and let the dress be a learning experience. I put the purple velvet down and left it, it was not on sale, it would be a sizeable impulse purchase at 15.99 a yard for 4 yards. I can’t justify 60 USD for a passing whim, that would be a poor use of money. So I left the daydream and moved on. Still thinking about that fabric. Another few weeks passed, finding myself in my local Joann’s again. It was my favorite place to explore. I went to the shopping plaza over the weekend where Joann’s remains live boarded up with the lights still on. It was eerie. I found myself thinking about what was blocked off inside? Was the fabric slumbering in the bolts, waiting to be made into something new? Would the yarn ever find a home in a fiber artist’s hands? It felt like a mistake, a bad dream, but it was not. It is over and now it is just a memory.

Anyway, on the second trip to Joann’s during the Halloween sales, I found my purple beloved. The bolt was still full, now marked down to 7 USD a yard. But this time I couldn’t get the project out of my mind. I’m glad I did give in to the creative urge or this project would be left without an ending. At the time, I had no idea Joann’s was going to go under. I thought I had plenty of time to remake this when in reality the window was closing. As I worked on this dress in 2025, I followed Joann’s story with frustration and weight of expectation. This remake is the final try, for this fabric I will never find again.

I made a different dress from the original and that surprised me. I believed going into the remake project that I would duplicate the same dress but with better technique. Instead, it was a project of feel. This time, I had a dress form I could drape the garment on. I had fabric clips with securely held the the slippery fabric together while on the dress form or for a quick test of fit on my own form. This time I understood proportion and where this dress would fit into my wardrobe instead of making a dress that only went with my moto jacket. I reinforced the shoulders and was thoughtful about my stitching, to make the garment strong. I added darts to pull the dress in where it was fitting baggy instead of leaving it like a velvet sack.

It became something new and I am okay with that. None of us are the same as we were years ago, we grow and evolve with every passing year. Making a dress for now, with the spirit and the fabric of my first garment, but with a new neckline and a new fit I think is an inevitability of learning and growth. I had the patience this time to try on the dress, mark what was not fitting right, and go back to work until it was correct. That was not something I was willing to do when I started, because it was all so new and confusing, but with time and practice, those new concepts became a familiar old friend. Like this tan carpet. It wasn’t until I looked at the 2020 mirror photo and the 2025 mirror photo that I saw it. The carpet in the house we bought looks just like the carpet in our apartment in Meadville. How random is that?

I have one more section of the purple velvet left over that I plan to make something with, possibly a mini dress, a blouse, or maybe a jacket. I think knowing this fabric is a relic now, makes me feel unwilling to finish this scrap project, because once it is done. I’m going to feel like my time experimenting with fabric from my first craft store is done. A chapter of my sewing life is over, and I hate saying goodbye. I’m a sentimental person. When things end, I take it hard. I dwell on the loss and muse on it. It might be unhealthy. It certainly makes life harder as a person who wants to keep things alive that are gone, it’s why I think I was drawn to study history in college.

As I keep making things, some of these projects become an archive of crafting past. What are some things in your own life that have moved from the present to part of your past? Does it surprise you to consider these things as your history instead of your current story? Thank you, reader, for joining me again down this sewing memory lane. I hope you have a wonderful day!

My Friday Night Dinner Outfit

The start of September feels like the start of the Gilmore Girls season. Probably because it used to start airing around this time of the year, but also the show follows a seasonal structure. Usually beginning before or during the school year as Rory embarks on her next academic chapter. A key aspect of Lorelai and Rory’s life is the Friday Night Dinners at Richard and Emily’s house, every week. Emily and Richard, being rather formal people, expect a dress code for their family dinners being formal. It reminds me a bit of dressing up for church as a kid.

There is also a silhouette to the outfits each of the Gilmore Girls wear. They wear a lot of dresses with small cardigans over top, but they also pair fitted blouses with a knee length skirt, usually flared for Rory or a pencil skirt for Lorelai. Rory dresses with a more demure style, that reflects her academic personality where as Lorelai is a bit bold with her patterns, textiles, and colors. It matches her personality of being independent and need to separate her life from her parents’ world.

I thought this combination married both the silhouette of Rory’s style with the bold and playful textiles of Lorelai’s personal style. The blazer is not a Potato Technology piece, I ordered it from YesStyle, but the bustier top and skirt are my own designs. The Floral Print Grafitti Bustier Tank, I designed in 2023 from 1/2 a yard of fabric. This piece was draped and cut on the form. I wish I had known about making craft paper patterns at the time because it’s going to be a challenge to reproduce. The Expressions and Lines Skirt is a new design from this summer. It is a satin graphic print that for the first time, I was able to cut out the pattern directionally without any mishaps! I’m so pleased. 😀

I think the combination of pieces look a bit 2000s, mid 2000s for sure, and capture the essence of the time period. The blend of Lorelai and Rory’s style is a reflection of how I consume the show now. Which character I relate to is a blend as I get closer to Lorelai’s age when the show begins instead of Rory’s age, which is so weird to realize. I’ve truly grown up with this story, being just 12 when I first watched it. Lorelai’s story finds me more each time I watch it.

Potato Technology’s Spring Summer 2024 Collection Part Two

L to R: Main Sails Billow Tank with Updated Houndstooth Shorts (2023)

Star and Moon Sanderson 1693 Vest with Dungaree Buttons

Vintage Fabric ‘I Just Adore Puff Sleeves, Marilla’ Blouse with Tie Back (Deadstock)

Purple Set Sail Tank with Peplum in Sheer Cotton Gauze, Fishing Tackle Chambray Mini Skirt with Matching Belt,

Vintage Fabric Green Thrill Blouse with Flutter Sleeves (Deadstock)

Koala Empire Waist Tank Repurposed from PJ Pants

Rabbit in Thicket Camisole Repurposed from Shorts (2023), Map Skirt Repurposed from Map Dress (2023)

To Hood or Not To Hood, That Was the Question

I’m currently working on a big knitwear design project. Probably the most ambitious project that I have taken on yet in my time designing knitwear and fabricating sweaters. It is a sweater coat with varying stripes that I have knit in sections over the past few months. I’m currently three months into this project, and per my working style, I’ve worked on smaller projects alongside this big project to keep me stimulated and my motivation high.

This was my progress at the end of September. I had the entire bodice done and sewn together at the shoulder seams, back seam, and under the arms until the point of the sleeve opening. Because I sew, this process of knitting makes more sense to my creative brain than the knitting in the round process. If this type of knitting drives you nuts, it’s only going to get worse so I warned you. 🙂

September Progress

October Progress

In October, I honestly futzed around with the hood and collar and that was about it. I knit one other body panel so two out of four were done and drafted collar and hood patterns, over and over again. I initially expected to make more progress in October and to have just the sleeves left going into November. That didn’t happen.

It was that dang collar and hood section, that kept me in this place of indecision and design frustration. I initially made a collar with a normal stitch, not a ribbed which looks a bit cleaner. I think I was concerned about the collar looking cohesive and was afraid that a solid collar in rib instead of a knit-purl stitch with a stripe would look less cohesive. It looked odd actually. The stripe was good, but the flat collar which began to roll on the end looked ineffectual for a collar. After I sewed it in I carefully cut the collar away which was discouraging from a progress perspective, until I realized the stitched of the collar remained (because I was afraid of snipping the wrong yarn and destroying the shoulders) and the neck opening had this lovely fit and structure now. The shoulders were slightly gathered up to the neck opening and the fit was fantastic now! It just needed a new collar.

I had an idea – what if instead of a collar I went straight to a hood. I had been watching a lot of Gilmore Girls throughout October, seasons four and five to be exact which spanned the years of 2003-2005, peak 2000s fashion. And you know what was popular during this time? The duster! I had an idea, what if the hood was just one piece of this puzzle, what if I made it longer, much longer, added a hood, a rib trim around all the edges with a button closure! A funky duster the likes of Sookie, the Olsen twins, Lindsay Lohan, and even Lorelai herself would have worn during this time.

I knew I wanted to keep the stripe theme going, something that looked labor-intensive and expensive, like a bohemian duster or sweater coat that would be featured in an Anthropologie campaign. I wanted the hood to carry on that stripe motif to make it feel integral to the garment, not an add-on.

Last October, I learned how to draft hood shapes for several outerwear pieces that I crafted for my loved ones as a part of my Potato Technology’s Autumn/Winter 2022 Collection so I am pretty comfortable with the shape and sizing scale for a hood on an outerwear garment. The thing I underestimated though was how tricky it would be to form the hood as I went, as you do with knitting, instead of cutting the hood shape out of fabric. This kicked my butt. I spent a weekend making one half of a hood out of yarn and it was so cursed. When I took it off the needles it didn’t look like the hoods I had created out of fabric and thread. It was lumpy, too short, and not going to work for what I needed.

Once again, I got my scissors out cut the bind off loose, and proceeded to wind the yarn back into a ball. That is when I decided I had to move on to a new section of the project, for my own sanity. Because I still didn’t know how the hood became misshapen in the fabrication process. None of it made sense. Going straight back into making a new hood when I didn’t know how to solve the problem would be a waste of time and resources. I only have one set of size 7 needles, there was no need to tie them up in another likely failed attempt.

I pivoted to the the length of the duster. To make the bottom have more structure I decided to knit this section in two pieces.

November’s Progress (11/16)

This was a good move. I made the first half 30 stitches wider than the previous body panels to create some drape around the hips and the results are cute. The sweater has this sophisticated little flare that accentuates the waist – I was not expecting that! 🙂

With this step in the right direction, I got to work and powered through the last two body panels and the second flare panel at the bottom. It was a lot of work but only took two weeks to complete with focus, stretching, and snacks.

I have a tendency to let the garment lead me. I like to see how the fabric or yarn responds to the vision I have in my head and adjust the design accordingly to the way the project is coming together. The flared panels at the bottom of the sweater inspired me to pivot again, to step back from the hood and long duster to a sweater coat cardigan that could be buttoned into a sweater dress if I would be inclined to wear it as such.

That’s where it stands now. I began drafting a sleeve and designing the color work I had planned for the stripes before I continued any further because I could change my mind and add more length. The hood is out through, it’s just not the vibe.

When will this project be done? I sure hope by the end of 2023, but we shall see.

Potato Technology S/S Collection 2023 Part Two

L to R: Blue Leopard Ruffle Y2K Mini Skirt, Wabi Sabi Sweetheart Patches Skirt, Cheetah Gurl T-Shirt, Olive Rib Knit T-Shirt, Plaid Rachel Green Shorts, Bunny in the Forest Shorts

L to R: Leopard in the Forest Shorts, Forest Shadows Shorts, Beach Blanket Duo of Shorts and Skirt, Classic Nautical Stripe Shell Top, Blue Rib Knit Muscle Tank, Picnic Plaid Peplum Top,

L to R: Lilies of the Valley Camisole Top, Tangy Floral Crossback Camisole, New Smyrna Beach Camisole

Pockets Are Friends Not Foes

It should have been a compliment or even a point of affectionate doting that instead of buying shorts from the outlets or the myriad of options online, my husband wanted me to make him a pair of shorts to replace an old pair. Instead, the mere thought filled me with dread. Shorts? Menswear shorts? I can barely make my own shorts! (Not true, I’ve made eleven attempts at this point and only a few tries did not pan out.) I don’t have the right pattern! (Also not true, I do, a very good one that is classic and versatile in silhouette for pants and shorts.)

Both of us could see through my excuses and my lame attempt at avoiding a task that would make me grow and apply the skills I have learned this year. A good thing to do. Economical and customizable. A win-win scenario. I was feeling confident. His encouragement and confidence in me was brimming. The fabric selected a quality, not too heavy cut of canvas material. And yet, my overachieving penchant to be the best pushed me forward, to the pages of Mood’s online store. Another two cuts of fabric were ordered in a sturdy striped shirting of gray and another of green.

Yet they sat in my stash as I pondered. I hemmed and I hawed, until one day the pattern called to me from my sewing stash. Afraid I would deny the voice for another month, on that June day I cleared my table and grabbed my scissors ready for a fabric fight. I carefully spread the fabric across the horizontal expanse and with purpose, I dug out the first pattern piece. The front, cut two, mind the seat curve. Again with the back, the waistband, and then I remembered I promised him pockets. Pockets and a zip fly. Oh dear, how could I forget such a crucial step? In a flurry of tissue paper patterns and fabric scraps, I dug through the bigger offcuts until a pocket was procured. I rinsed and repeated twice until a stack of short building materials and a dusting of scraps fell beneath my feet.

I’m not sure why pockets intimidate me so, I think it could be how they are inserted. You must make them even, strong, and seated on the hips just right so that they tuck into the pants without creating wonky bulk or disturbing the line of the garment. They’re not hard to do with my sewing machine, yet I avoid them like a wasp flying at my head. Zippers too create such a fine finish, compared to the chore that is buttons and buttonhole creation, yet I’ve stayed away from those two in 2023. I think we get into comfort zones and become afraid of stepping out, even though we have the skills and are fully prepared for the next step, we just forget to move. It’s a shame because, without those friendly pushes from people who love us, we may never venture into a new great thing.

I’m glad Kyle believed in me and didn’t let me avoid this project because these shorts gave me such a sense of accomplishment! I now want to insert pockets into the garments chose not to, mostly my own clothes. I want to sew with more care moving forward so that the items I make have more polish. My skillset is leveled up to do this, I don’t have to hide in simple projects anymore. Pockets are friends, and zippers are a fun challenge. Buttonholes are still foes though, at least for now.

Potato Technology Spring/Summer 2023 Collection, Part One

L to R: I Dream of Fashion Polly Bustier, Chocolate Bunny Three Piece Set, Glitch Mode Herringbone Skirt, Wilson Plaid Midi Skirt, 254 4th Street Blouse, White Rabbit Tank, Peach Perfect Drawstring Shorts, Engarde Cardigan, Pleated Chambray Tank, Red Currant Blouse and Skirt, Grayscale Summer Kilt, The Mirage Reversible Knit Top & Skirt (4 combinations), Digital Snake Print Dress

Create a website or blog at WordPress.com

Up ↑